Ace Belt Driven Centrifugal Pump 21-Spline 1.25" Suction x 1" Discharge @ 65 GPM

Description

The original belt drive standard since 1964.
Time tested and field proven design.
Widespread parts and service availability.
Most Economical belt drive.
Standard 21 spline 1-3/8" (34.9 MM) split bore shaft with locking collar for 1000 RPM PTO models.
Port sizes: Inlet 1-1/4" NPT, Outlet 1" NPT.
Max Pressure: 80 PSI
Max Flow: 65 GPM
Weight: 45 lbs
Our eBay Store
About Us
Contact Us
Add to Favorite Sellers
Ace Belt Driven Centrifugal Pump 21-Spline 1.25" Suction x 1" Discharge @ 65 GPM
899.95
PTOC-1000-21SP Suction 1-1/4" Female Pipe Thread Discharge 1" Female Pipe Thread Chemical Resistant Valox Impeller Standard Viton Carbon/Ceramic Mechanical Seal Spring loaded idler absorbs shock of PTO engagement New BAC-15-PIN feature ensures proper alignment Cast iron centrifugal with for direct mount on 21 spline, 1-3/8", 1000 RPM PTO Shaft Maximum Gallons Per Minute - 65 GPM Maximum PSI - 80 PSI Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period. Do Not Run With Flow Shutoff For Extended Periods - Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications Maximum PSI - 80 PSI Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period. Do Not Run With Flow Shutoff For Extended Periods - Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications